Product Description
STONETECH KlenzAll Cleaner is a heavy duty cleaner made to clean the toughest soils on natural stone and tile.
Uses (Interior and Exterior) Countertops Backsplashes Floors Walls
Advantages Powers through stubborn grease and soils Safe on stone, will not etch Prepares surface for resealing Water-based alkaline formula Ready-to-use or concentrate formulas
Recommended Surfaces Natural stone, masonry, tile and grout surfaces such as: Marble
Granite Limestone Travertine Slate Sandstone Flagstone Concrete Ceramic Tile Porcelain Tile Quartzite
Shelf Life Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored at temperatures >50°F (10°C) and <90°F (32°C).
VOC Content Heavy duty: 0.93% (Consumer Product)
Cautions Consult SDS for more safety information.
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if any discomfort continues.
Skin contact: Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention immediately.
Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately.
Ingestion: Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Get medical attention.
Data Sheets are subject to change without notice. For latest revision, visit www.laticrete.com. DS-215.0-0516
Storage and Handling Instructions CORROSIVE. HARMFUL IF SWALLOWED. MAY CAUSE SEVERE EYE AND SKIN BURNS, AND RESPIRATORY IRRITATION. Do not ingest. Avoid contact with eyes and skin. Use protective eyewear and gloves. Avoid prolonged exposure to vapors. Use in a well-ventilated area. For repeated or professional spray use, a respirator is recommended. Consult SDS. KEEP OUT OF THE REACH OF CHILDREN. Do not freeze or store above 100 °F (38 °C). Do not mix with other chemicals. Do not release to natural waterways.
TECHNICAL DATA
Physical Properties Form Liquid Color Light yellow Odor Mild
Surface Preparation for STONETECH® KlenzAll™ Cleaner - Concentrate Read entire label before using. Use only as directed. Always test in a small inconspicuous area to determine ease of use and desired results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Avoid skin and eye contact with product. Wear protective eyewear, gloves, long sleeves, and long pants while handling concentrate. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying.
Directions for Ready-to-Use
1. Spray directly on soiled area. Avoid applying product onto unintended surfaces. 2. Scrub with a clean cloth or stiff nylon brush as needed. 3. Remove STONETECH KlenzAll Cleaner using a clean dry towel, or mop. 4. Rinse area well with clean water. 5. Reseal cleaned area with a STONETECH sealer.