Product Description
LATASIL 9118 Primer is a one component primer designed to increase adhesion of LATASIL to various substrates.
Uses
- Increases adhesion & bond strength for dependable long lasting installations
- For all underwater and permanent wet area applications such as pools, fountains, showers, tubs, spas, saunas and steam rooms
- Ideal for stone applications
- Ideal for harsh environment
Preparation
- Thoroughly clean all surfaces of dust, dirt tar, oils, and other debris. Remove rust and scale from metal surfaces by abrasive cleaning or wire brushing. Masonry surfaces should also be wire brushed and blown with compressed air to remove dust.
- Thoroughly clean and degrease all surfaces with an industrial solvent such as naptha, mineral spirits, xylene, toluene or MEK on a clean oil-free rag.
Apply LATASIL™ 9118 Primer to clean, dry surfaces by brushing, dipping, or spraying.
- Apply a thin layer evenly to the substrate-do not apply too thick as bond will break.
- Take care not to contaminate the veneer surface.
- Allow the primer to dry until all the solvent evaporates and is dry to the touch (generally 30–60 minutes at 70°F/21°C). Drying time depends on temperature, humidity conditions and the porosity of the substrate.
- Apply sealant as directed (see DS 6200.1).
